Certified OSHA Training
NFPA 70E, OSHA 1910.269 & Subpart S Safety Training (In Person)
- OSHA-Authorized
- DOL-Aligned
$
$200.00$
What You’ll Learn?
Updated:
NFPA 70E, OSHA 1910.269 & Subpart S Safety Training (In Person)
\
What You’ll Learn?
Course Details
The NFPA 70E Classroom Course is an in-person, instructor-led electrical safety program built around the three standards that govern electrical work in the United States. NFPA 70E is the consensus standard for electrical safety in the workplace, and it defines how employers assess and control shock and arc flash hazards. OSHA 29 CFR 1910.269 sets the requirements for electric power generation, transmission, and distribution work, while 29 CFR 1910 Subpart S covers general industry electrical design and safety-related work practices. If you are asking what this classroom session covers, the answer is hazard identification, shock and arc flash injury prevention, the selection and use of personal protective equipment, and safe work practices such as Lockout/Tagout. Because a live instructor leads every session, your crew can raise site-specific questions and get answers in the room rather than saving them for later. The training is open to all levels, so Qualified Persons who work directly on exposed electrical parts and Unqualified Persons who work near those hazards can attend the same session.
This NFPA 70E classroom course suits electricians, utility and power line personnel, maintenance technicians, and the supervisors and safety professionals responsible for their electrical safety programs. A certificate of completion is issued by The Training Institute once you finish the session, and your record posts in the learning system when the class wraps up. Employers often ask whether this training makes a worker qualified, and it does not, because your employer must still authorize you for specific tasks and equipment and site-specific procedures always take precedence. Enroll below to book this in-person NFPA 70E, OSHA 1910.269, and 1910 Subpart S electrical safety training for your team.
Course Syllabus
Course Description
The NFPA 70E Classroom Course from The Training Institute teaches workers to spot and control real job hazards. Because a live instructor leads every session, your crew can ask questions as they come up. Also, the lessons build on each other in a clear order. As a result, learners finish with knowledge they can use right away.
What Is the NFPA 70E Classroom Course?
NFPA 70E, OSHA 1910.269 & Subpart S Safety Training is an instructor-led safety course built around 1910 Subpart S and NFPA 70E. The lessons stay short and use plain language. In addition, the topics stay tight, so you can work through them in short sittings. So crews can put the material to work the same day.
Who Should Take the NFPA 70E Classroom Course?
Workers, supervisors and safety leads whose duties touch this hazard should take it. Also, safety leads often assign it during onboarding or as a yearly refresher. In short, anyone exposed to the risk benefits from the training.
How Long Does It Take?
Session length depends on the group and the topics your site needs. Because a live instructor leads it, the whole group finishes together. Then records post once the class wraps up.
What Do You Receive?
Every seat opens the full curriculum and its support material. For example, you get:
- Every lesson in the course
- Progress tracking inside the LMS
- Guided instruction from start to finish
- A course evaluation
Learners who pass earn a printable certificate of completion. However, a certificate documents training only. OSHA does not certify individual workers. So pair this course with the site-specific instruction your own program calls for.
How Does the Course Work?
First, you enroll in the session. Then the group works through the material with a live instructor. Finally, learners close out the course and the record updates in the LMS. Therefore, your whole crew trains together and finishes on the same day.
Ready to book the NFPA 70E Classroom Course? Browse the full course catalog to line it up with the rest of your safety plan. For the rules behind the training, read the OSHA electrical safety guidance.
What Will I Learn?
In NFPA 70E, OSHA 1910.269, and Subpart S safety training, you learn how to identify electrical hazards, prevent shock and arc flash injuries, use proper personal protective equipment (PPE), and apply safe work practices like Lockout/Tagout to comply with federal regulations.
Target Audience
NFPA 70E, OSHA 1910.269, and OSHA 1910 Subpart S safety training includes all workers exposed to electrical hazards. The audience splits into two primary groups: Qualified Persons (who touch or work directly on exposed electrical parts) and Unqualified Persons (who work near hazards or perform support duties).
Total Course Duration
N/A
Materials Included
N/A
Requirements / Instructions
N/A
Curriculum
Certificate of Completion
Meet Your Instructor
Lead HSE Instructor
The Training Institute is a team of seasoned field experts with decades of hands-on experience across electrical safety, OSHA compliance, confined-space training, and hazardous-materials response. Our instructors combine practical jobsite expertise with proven adult-learning methodology to deliver training that meets — and exceeds — federal and industry standards.
Student Review
(
0 Review)
Similar Courses
by
The Training Institute
by
The Training Institute
by
The Training Institute
Ready to get certified?
Enroll in NFPA 70E, OSHA 1910.269 & Subpart S Safety Training (In Person)
Volume pricing for 5+ seats. Dedicated compliance support and audit-ready records.
Sign Up for Newsletter
Quick Links
Visit Us
1509 S. Dobson Street
Burleson, TX 76028
© 2026 The Training Institute. All rights reserved.