Certified OSHA Training
HVAC Tools and Safety Equipment
- OSHA-Authorized
- DOL-Aligned
$
$30.00$
What You’ll Learn?
Updated:
HVAC Tools and Safety Equipment
\
What You’ll Learn?
Course Details
HVAC Tools and Safety Equipment is a self-paced online course that teaches HVAC professionals how to safely select, inspect, use, maintain, and store the tools and equipment used in HVAC installation, service, maintenance, and repair. Delivered entirely through the TTI Learning Management System, the training builds practical hand and power tool safety skills, covering tool inspection before use and manufacturer-recommended procedures for common HVAC equipment. Learners practice hazard recognition and safe work practices, and study the personal protective equipment (PPE) needed for the electrical, refrigerant, and pressure hazards found on the job. The course addresses electrical safety around HVAC testing and diagnostic equipment, safe handling of refrigerant recovery and service equipment, and proper use of ladders and portable access equipment. Content reflects applicable OSHA requirements, including hand and portable powered tool standards under 29 CFR 1910 Subpart P and personal protective equipment standards under 29 CFR 1910 Subpart I. Emphasis throughout is on injury prevention, equipment protection, and stopping the tool-related injuries common in HVAC work.
The course is intended for HVAC technicians, installers, apprentices, maintenance personnel, service technicians, and supervisors responsible for HVAC operations and maintenance. Because it is asynchronous and self-paced online, participants complete the modules at their own pace within their enrollment period, with progress automatically tracked in the LMS. Successful completion, including the required assessments and course evaluation, earns a certificate of completion and 0.05 IACET CEU (0.5 contact hours). Enroll today to build safer tool-handling habits and strengthen HVAC safety on every job.
Course Syllabus
Course Description
Pre-Course Information Sheet
Course: HVAC Tools and Safety Equipment (Online)
Course Overview
This course provides participants with the knowledge and skills necessary to safely select, inspect, use, maintain, and store tools and equipment commonly used in HVAC installation, service, maintenance, and repair operations. Participants will learn hazard recognition, safe work practices, personal protective equipment (PPE) requirements, electrical safety considerations, and manufacturer-recommended procedures for HVAC tools and equipment.
The course emphasizes injury prevention, equipment protection, and compliance with workplace safety requirements through proper tool use and maintenance practices.
Delivery Method
Online / LMS-Based Asynchronous Learning
Participants may complete the course at their own pace within the allotted course access period.
Course Duration
0.5 Contact Hours
IACET CEUs Awarded
0.05 CEU
Technical Requirements
Participants must have:
- Reliable internet access
- Current web browser (Chrome, Edge, Firefox, or Safari)
- Audio capability for course videos and PowerPoint
- Ability to view PDF documents
- Access to the TTI Learning Management System (LMS)
Recommendation:
- Desktop or laptop computer for optimal learning experience
Criteria for Earning IACET
To receive 0.05 IACET CEU, participants must:
- Complete all required course modules
- Complete all learning activities
- Successfully complete required assessments
- Achieving a minimum passing score of 80% on course assessments
- Complete the course evaluation
Learner Support
Technical assistance is available for LMS access and navigation issues.
For support, contact:
Phone: (817) 769-6275
Email: [email protected]
Accessibility Statement
TTI is committed to providing an accessible learning environment. Course materials include accessibility features such as:
- Accessible digital content
- Adjustable screen viewing options where available
Learners requiring accommodation should contact TTI prior to beginning the course.
Important Completion Information
Participants are encouraged to complete the course within the assigned enrollment period. Progress is automatically tracked within the LMS.
Failure to complete all required activities and assessments will result in no CEU award being issued.
Acknowledgment
By beginning this course, participants acknowledge that they have reviewed and understand the course requirements, learning outcomes, participation expectations, and CEU award criteria.
What Will I Learn?
Upon successful completion of this course, participants will be able to:
- Identify common hazards associated with HVAC tools and equipment.
- Recognize the importance of tool inspections before use.
- Select appropriate hand tools for specific HVAC tasks.
- Demonstrate safe use of power tools commonly used in HVAC work.
- Identify electrical hazards associated with HVAC testing and diagnostic equipment.
- Explain proper use of ladders and portable access equipment during HVAC operations.
- Select and use appropriate personal protective equipment (PPE) for HVAC tasks.
- Describe safe handling procedures for refrigerant recovery and service equipment.
- Explain proper maintenance, storage, and transportation of HVAC tools and equipment.
- Identify common causes of tool-related injuries and methods to prevent them.
- Apply safe work practices during installation, maintenance, and troubleshooting activities.
- Demonstrate knowledge of emergency procedures related to tool and equipment incidents.
Target Audience
This course is intended for:
- HVAC technicians
- HVAC installers
- Maintenance personnel
- Apprentices and trainees
- Facility maintenance staff
- Mechanical contractors
- Service technicians
- Supervisors responsible for HVAC operations and maintenance
Total Course Duration
30 minutes
Materials Included
Participants will have access to:
- HVAC Tools and Safety Equipment Modules
- Final Assessment
- Course Evaluation
Requirements / Instructions
There are no formal prerequisites for this course.
Participants should:
- Possess basic workplace safety knowledge.
- Have a general understanding of HVAC systems and maintenance activities.
- Be physically capable of participating in practical exercises, if applicable.
Curriculum
2 modules
HVAC Tools and Equipment Safety
HVAC tools and equipment safety involves using Personal Protective Equipment (PPE)—including safety glasses, insulated gloves, hard hats, and, when necessary, respirators—to protect against electrical shocks, burns from refrigerants, and physical injuries. Key practices include inspecting tools for damage before use, using calibrated instruments, employing proper lifting techniques, and adhering to lockout/tagout (LOTO) procedures.
- HVAC Tools and Equipment SafetyLesson
- HVAC Tools and Equipment Safety TestQuiz
Course Evaluation
\
- Course Review & CompletionLesson
Certificate of Completion
Meet Your Instructor
Lead HSE Instructor
The Training Institute is a team of seasoned field experts with decades of hands-on experience across electrical safety, OSHA compliance, confined-space training, and hazardous-materials response. Our instructors combine practical jobsite expertise with proven adult-learning methodology to deliver training that meets — and exceeds — federal and industry standards.
Student Review
(
0 Review)
Similar Courses
by
The Training Institute
by
The Training Institute
by
The Training Institute
Ready to get certified?
Enroll in HVAC Tools and Safety Equipment
Volume pricing for 5+ seats. Dedicated compliance support and audit-ready records.
Sign Up for Newsletter
Quick Links
Visit Us
1509 S. Dobson Street
Burleson, TX 76028
© 2026 The Training Institute. All rights reserved.
Course Materials
Preview the materials included with this course. Enrolled students can download all files.
- HVAC Tools and Safety EquipmentSign in & enroll